Mesa/Boogie Clearlink (Receive) – Buffer and Line Driver
The CLEARLINK RECEIVE ISO/CONVERTER is the ultimate big stage solution for all instruments where signal must travel longer than 15 to 20 feet. It’s most common application is receiving a buffered signal through long cabling from its companion product–the CLEARLINK SEND–at the tail end of a Pedal Board and converting the XLR balanced signal that transmits back to a ¼” unbalanced signal appropriately matched for feeding an instrument amplifier.
Mesa/Boogie Clearlink (Send) – Buffer and Line Driver
The CLEARLINK™ (SEND) LINE DRIVER is designed to compensate for losses in Tone due to increased capacitance in long cable runs. With a high quality buffer and +12dB of available output gain, it has the ability to drive cable runs of up to 330 Ft./100M before noticeable degradation, when added in-line on the feed from Pedal Board to Amplifier. When combined with a STOWAWAY™ INPUT BUFFER on the Instrument, the CLEARLINK SEND forms an “Effects Loop” for the Instrument-Pedal Board-Amp signal chain that will reclaim the integrity of your sound through boosted levels and buffering or impedance matching. Whether used by itself, or with the STOWAWAY as a comprehensive “Front End” solution, it will provide the needed “stable impedance source” to ensure the pieces in your rig “communicate” well. It can be used for balanced signals via two different output jacks; standard 3-pin XLR or ¼” TRS. It also supports unbalanced signals via the standard ¼” mono jack. If you’re going to send your signal on a marathon, make sure you have a clear link to communicate… because you don’t want your Tone lost in translation.
Mesa/Boogie High-Wire Dual Buffer Line Driver Output Booster
The HIGH-WIRE™ is our Dual Buffer and Line Driver in a one-stop solution that addresses both Input and Output challenges in the same space saving chassis. Between Instrument and pedals, it provides a stable, consistent load for your guitar’s pickups, ensuring your signal arrives at the first pedal intact and full of Tone. From Pedal Board to the amplifier, it not only buffers the signal, ensuring optimum impedance loading and performance, but also allows for increased signal levels for extra long cable runs via the built-in Line Driver (Footswitchable Boost) feature. As with the Stowaway, all buffer circuitry is 100% discrete Class-A. The HIGH-WIRE also incorporates a fixed +3dB BOOST on a top mounted mini-toggle. The Footswitch is Dual Function and allows both the variable BOOST when hit once and a MUTE when held for a second. The HIGH-WIRE is the ultimate all-in-one Pedal Board signal loss remedy and will remove your tightrope Tone walk once and for all.
Mesa/Boogie Stowaway Compact Input Buffer
The Stowaway™ is our compact 100% discrete Class-A Input Buffer solution designed to remedy a whole array of Input challenges caused by a variety of issues. From impedance loading and mismatching, to changes in a pickup’s character and response as a result of varying effect pedals’ input impedance and interconnecting cables’ capacitance, the Stowaway provides the stable, consistent load your instrument needs to sound as intended. While the Stowaway’s footprint is small, allowing it to be mounted on the most crowded of pedal boards, its Feature Set is professional and comprehensive. If your signal does any significant traveling, bring along a Stowaway to guard your Tone.
RADIAL J48 PHANTOM POWERED ACTIVE DIRECT BOX
- Ultra low distortion of all types
- Exceptional headroom & dynamic range
- Retains instrument’s natural sound
- Powered by 48V phantom
RADIAL JDI PASSIVE DIRECT BOX
- Jensen Transformer equipped passive DI
- Eliminates hum and buzz from ground loops
- Virtually zero phase & harmonic distortion
- Exceptional signal handling and noise rejection
RADIAL PROD2 STEREO DIRECT BOX
- Stereo direct box designed for keyboards
- Smooth, warm sound rounds out digital edge
- Able to handle huge transients without choking
- May be rack mounted for touring rigs
RADIAL PRO D.I. PASSIVE DIRECT BOX
- Compact passive direct box for stage and studio
- Able to handle huge transients without distortion
- Transformer isolation eliminates noisy ground loops
- Plug and play easy to use feature set – on stage or in the studio
ONE CONTROL CHAMAELEO TAIL LOOP II 5 LOOP PROGRAMABLE SWITCHER
The Chamaeleo Tail Loop Mark II is a five-channel programable loop switcher equipped with six DC outputs. The loops are all true bypass and it also has a separate tuner output. Perfect for pedals or tuners that seem to sucking out your tone while not in use. Three banks for a total of fifteen individual programs.
Takes a standard 9V power supply and can be used passively if so desired, however power outputs will not be active.
ONE CONTROL IGUANA TAIL II 5 LOOP SWITCHERThe Iguana is a five-channel loop switcher equipped with six DC outputs. The loops are all true bypass and it also has a separate tuner output. Perfect for pedals or tuners that seem to sucking out your tone while not in use. Takes a standard 9V power supply and can be used passively if so desired, however power outputs will not be active.
ONE CONTROL SALAMANDRA TAIL 3 LOOP PROGRAMABLE SWITCHER
This is an effect switcher with increased usability and operability. The One Control Salamandra Tail Loop was specially developed to control the effect with more flexibility.
ONE CONTROL XENAGAMA TAIL II 3 LOOP SWITCHER
The Xenagama is a three-channel loop switcher equipped with four DC outputs. It’s perfect for smaller pedal boards that don’t have the room to accommodate a switcher and a power supply. The loops are all true bypass and it also has a separate tuner output. Perfect for pedals or tuners that seem to sucking out your tone while not in use. Takes a standard 9V power supply and can be used passively if so desired, however power outputs will not be active. This small loop switcher is perfect for the minimalist who needs a little more.
ONE CONTROL BLACK LOOP 2 LOOP SWITCHER
The BLACK LOOP is a 2 Loop true bypass switcher with two DC outs.
While using the DC Input the two DC outs can be used. While pedals are connected to Loop 1 or Loop 2 they can be simultaneously powered and bypassed by using the Black Loop’s true by-pass capabilities.
Players can connect multiple pedals into each loop to create two independent effect chains. The Black Loop is a great solution for bypassing vintage effect while not in use. The Black Loop has several uses depending on how you connect it.
MXR ECHOPLEX PREAMP BOOSTER
- Faithful reproduction of the legendary Echoplex® EP-3 front end
- Gain boost up to +11dB
- True Bypass
BOSS FS-7 DUAL FOOT SWITCH
FS-7 is a compact dual foot switch for remote control of effect pedals or amp channel switching. Two footswitches are arranged in tandem, which saves space on effects pedal boards. Two selectable modes for latch or momentary allow for control of a wide range of equipment.
BOSS FS-6 DUAL FOOT SWITCH
Two switches in one, BOSS’s FS-6 combines latch- and momentary-type switching into one unit. With two switches conveniently housed side-by-side, the FS-6 allows each switch to be set for latch or momentary operation. Pick the configuration that best suits your playing style and setup.
BOSS FS-5L LATCHING FOOT SWITCH
The FS-5L (black) is a latch-type foot switch with an LED to indicate status.
BOSS FS-5U MOMENTARY FOOT SWITCH
Roland/BOSS offers two types of sturdy metal footswitches for different applications. The FS-5U (silver) is a momentary “unlatch”-type foot switch.
BOSS AB-2 TWO WAY SELECTOR SWITCH
The BOSS AB-2 is a 2-way selector that makes changing inputs or outputs easy. One stomp is all it takes to instantly switch between two guitars or effects setups, change amplifiers or switch between an amp and tuner. Rock-solid BOSS construction ensures the AB-2 will stand the test of time.
BOSS TU-3W WAZA CRAFT CHROMATIC TUNER
With the TU-3W, BOSS brings Waza Craft mojo to the world’s leading stompbox tuner. At its core, the TU-3W provides rock-solid tuning equivalent to the industry-standard TU-3. In true Waza tradition, the pedal’s benchmark functionality is further enhanced with BOSS skill and craftsmanship. Pure, uncolored signal transfer is essential for a tuner, and the TU-3W features redesigned circuitry with selectable buffered or true-bypass operation and the most transparent audio pass-through possible. Packing high-end performance for discriminating players, the TU-3W delivers a premium pedal experience only available from BOSS.
BOSS ES-8 EFFECTS SWITCHING SYSTEM
The ES-8 Effects Switching System begins life with a sharp and clear mission: to provide pro and high-end users with cool and creative solutions. The new and innovative ES-8 is a system that represents a major leap “out of the box” from the standard individual stomp box utility.
BOSS ES-5 EFFECTS SWITCHING SYSTEM
Based on the same concept and features as the flagship ES-8, the ES-5 is pared down to offer more practical and essential use options for typical guitarists and bassists, and is drastically reduced in size to fit ready-made, standard-size boards. The innovation in creativity of pedalboard systems made possible by the ES-8 has become more available and affordable.
BOSS TU-3 CHROMATIC TUNER
The world’s top-selling stage tuner, the BOSS TU-2, evolves and improves with the debut of the new TU-3.
TC ELECTRONIC SPARK BOOSTER
With a full 26 dB of boost, Spark Booster delivers the juice you need for highlighting solos and nailing that killer lick or riff.