Mesa/Boogie Clearlink (Receive) – Buffer and Line Driver
The CLEARLINK RECEIVE ISO/CONVERTER is the ultimate big stage solution for all instruments where signal must travel longer than 15 to 20 feet. It’s most common application is receiving a buffered signal through long cabling from its companion product–the CLEARLINK SEND–at the tail end of a Pedal Board and converting the XLR balanced signal that transmits back to a ¼” unbalanced signal appropriately matched for feeding an instrument amplifier.
Mesa/Boogie Clearlink (Send) – Buffer and Line Driver
The CLEARLINK™ (SEND) LINE DRIVER is designed to compensate for losses in Tone due to increased capacitance in long cable runs. With a high quality buffer and +12dB of available output gain, it has the ability to drive cable runs of up to 330 Ft./100M before noticeable degradation, when added in-line on the feed from Pedal Board to Amplifier. When combined with a STOWAWAY™ INPUT BUFFER on the Instrument, the CLEARLINK SEND forms an “Effects Loop” for the Instrument-Pedal Board-Amp signal chain that will reclaim the integrity of your sound through boosted levels and buffering or impedance matching. Whether used by itself, or with the STOWAWAY as a comprehensive “Front End” solution, it will provide the needed “stable impedance source” to ensure the pieces in your rig “communicate” well. It can be used for balanced signals via two different output jacks; standard 3-pin XLR or ¼” TRS. It also supports unbalanced signals via the standard ¼” mono jack. If you’re going to send your signal on a marathon, make sure you have a clear link to communicate… because you don’t want your Tone lost in translation.
RADIAL SGI TX/RX STUDIO GUITAR INTERFACE SYSTEM
- Balanced line driver for guitars and bass
- Send signal over 100 meters (300 feet) without loss
- 100% discrete class-A with Drag Control™
- Delivers pure sound without artefact
In stock (can be backordered)
ONE CONTROL GECKO MK II MIDI SWITCHER
The Gecko is a great solution for quickly switching between programs on midi devices. With an increasing number of guitar pedals being built with midi capabilities, being able to access presets in a quick and efficient manner has become an important part of playing live. The Gecko allows guitarists to use two modes to access programs.
ONE CONTROL CHAMAELEO TAIL LOOP II 5 LOOP PROGRAMABLE SWITCHER
The Chamaeleo Tail Loop Mark II is a five-channel programable loop switcher equipped with six DC outputs. The loops are all true bypass and it also has a separate tuner output. Perfect for pedals or tuners that seem to sucking out your tone while not in use. Three banks for a total of fifteen individual programs.
Takes a standard 9V power supply and can be used passively if so desired, however power outputs will not be active.
ONE CONTROL IGUANA TAIL II 5 LOOP SWITCHERThe Iguana is a five-channel loop switcher equipped with six DC outputs. The loops are all true bypass and it also has a separate tuner output. Perfect for pedals or tuners that seem to sucking out your tone while not in use. Takes a standard 9V power supply and can be used passively if so desired, however power outputs will not be active.
ONE CONTROL SALAMANDRA TAIL 3 LOOP PROGRAMABLE SWITCHER
This is an effect switcher with increased usability and operability. The One Control Salamandra Tail Loop was specially developed to control the effect with more flexibility.
ONE CONTROL XENAGAMA TAIL II 3 LOOP SWITCHER
The Xenagama is a three-channel loop switcher equipped with four DC outputs. It’s perfect for smaller pedal boards that don’t have the room to accommodate a switcher and a power supply. The loops are all true bypass and it also has a separate tuner output. Perfect for pedals or tuners that seem to sucking out your tone while not in use. Takes a standard 9V power supply and can be used passively if so desired, however power outputs will not be active. This small loop switcher is perfect for the minimalist who needs a little more.
ONE CONTROL BLACK LOOP 2 LOOP SWITCHER
The BLACK LOOP is a 2 Loop true bypass switcher with two DC outs.
While using the DC Input the two DC outs can be used. While pedals are connected to Loop 1 or Loop 2 they can be simultaneously powered and bypassed by using the Black Loop’s true by-pass capabilities.
Players can connect multiple pedals into each loop to create two independent effect chains. The Black Loop is a great solution for bypassing vintage effect while not in use. The Black Loop has several uses depending on how you connect it.
DIGITECH FS3X 3 BUTTON FOOTSWITCH
The DigiTech FS3X is a welcomed addition to several DigiTech products; The Jimi Hendrix Experience™, The JamMan® and Expression Factory™ to name a few. The FS3X provides increased functionality and convenient Hands-free™ control over UP/DOWN selection of Models, Mode changes, Loop selection, auto START/STOPS and arms auto record where applicable. Compact and portable its small foot-print takes very little space on stage or in your gig bag. Durable 3 button metal chassis construction. A 10′ stereo TRS cable is included with each unit. GET THE MOST OUT OF YOUR DIGITECH PRODUCTS WHILE PERFORMING OR PRACTICING
BOSS FS-7 DUAL FOOT SWITCH
FS-7 is a compact dual foot switch for remote control of effect pedals or amp channel switching. Two footswitches are arranged in tandem, which saves space on effects pedal boards. Two selectable modes for latch or momentary allow for control of a wide range of equipment.
BOSS FS-6 DUAL FOOT SWITCH
Two switches in one, BOSS’s FS-6 combines latch- and momentary-type switching into one unit. With two switches conveniently housed side-by-side, the FS-6 allows each switch to be set for latch or momentary operation. Pick the configuration that best suits your playing style and setup.
BOSS FS-5L LATCHING FOOT SWITCH
The FS-5L (black) is a latch-type foot switch with an LED to indicate status.
BOSS FS-5U MOMENTARY FOOT SWITCH
Roland/BOSS offers two types of sturdy metal footswitches for different applications. The FS-5U (silver) is a momentary “unlatch”-type foot switch.
BOSS AB-2 TWO WAY SELECTOR SWITCH
The BOSS AB-2 is a 2-way selector that makes changing inputs or outputs easy. One stomp is all it takes to instantly switch between two guitars or effects setups, change amplifiers or switch between an amp and tuner. Rock-solid BOSS construction ensures the AB-2 will stand the test of time.
ROLAND GA-FC FOOT CONTROLLER
If you want to keep your hands on your axe at all times, the GA-FC Foot Controller lets you drive Roland amps from the floor. It allows for expansion as well: plug in optional expression pedals etc.
BOSS ES-8 EFFECTS SWITCHING SYSTEM
The ES-8 Effects Switching System begins life with a sharp and clear mission: to provide pro and high-end users with cool and creative solutions. The new and innovative ES-8 is a system that represents a major leap “out of the box” from the standard individual stomp box utility.
BOSS ES-5 EFFECTS SWITCHING SYSTEM
Based on the same concept and features as the flagship ES-8, the ES-5 is pared down to offer more practical and essential use options for typical guitarists and bassists, and is drastically reduced in size to fit ready-made, standard-size boards. The innovation in creativity of pedalboard systems made possible by the ES-8 has become more available and affordable.
Vox VFS5 VT Series Foot Controller for AD, VT, VTX, & AV Series and JamVox
By using the optional VFS5 foot switch you can switch programs, turn reverb or other effects on/off, or make speed/tap settings using your foot. This is a great advantage when you’re creating sounds or performing live. The VFS5 employs a tough steel design with traditional mechanical foot switches and an extra-long five meter integral jack lead. The VFS5 currently works only with the following models: VT20+, VT40+, VT80+, VT120+, VT15, VT30, VT50, VT100, AV30G, AV60G, VT20x, VT40x, & VT100x amps.
Vox VFS-2A Footswitch for AC Amplifiers w/LEDS
Dual footswitch with LED for Valve Reactor Series AC30VR & AC15VR, AC Custom Series AC15C1, AC30C2(X). Hi-quality durable all-metal construction with twin LED, separate stereo jack lead supplied for connect to amp. Compatible with AC15C1(X), AC15C2, AC30C2(X), AC15VR, AC30VR, and all Night Train G2 models.