- You cannot add "TRUETONE 1 SPOT POWER SUPPLY" to the cart because the product is out of stock.
-
Details
Mesa/Boogie Clearlink (Receive) – Buffer and Line Driver
The CLEARLINK RECEIVE ISO/CONVERTER is the ultimate big stage solution for all instruments where signal must travel longer than 15 to 20 feet. It’s most common application is receiving a buffered signal through long cabling from its companion product–the CLEARLINK SEND–at the tail end of a Pedal Board and converting the XLR balanced signal that transmits back to a ¼” unbalanced signal appropriately matched for feeding an instrument amplifier.
-
Details
Mesa/Boogie Clearlink (Send) – Buffer and Line Driver
The CLEARLINK™ (SEND) LINE DRIVER is designed to compensate for losses in Tone due to increased capacitance in long cable runs. With a high quality buffer and +12dB of available output gain, it has the ability to drive cable runs of up to 330 Ft./100M before noticeable degradation, when added in-line on the feed from Pedal Board to Amplifier. When combined with a STOWAWAY™ INPUT BUFFER on the Instrument, the CLEARLINK SEND forms an “Effects Loop” for the Instrument-Pedal Board-Amp signal chain that will reclaim the integrity of your sound through boosted levels and buffering or impedance matching. Whether used by itself, or with the STOWAWAY as a comprehensive “Front End” solution, it will provide the needed “stable impedance source” to ensure the pieces in your rig “communicate” well. It can be used for balanced signals via two different output jacks; standard 3-pin XLR or ¼” TRS. It also supports unbalanced signals via the standard ¼” mono jack. If you’re going to send your signal on a marathon, make sure you have a clear link to communicate… because you don’t want your Tone lost in translation.
-
Details
Mesa/Boogie High-Wire Dual Buffer Line Driver Output Booster
The HIGH-WIRE™ is our Dual Buffer and Line Driver in a one-stop solution that addresses both Input and Output challenges in the same space saving chassis. Between Instrument and pedals, it provides a stable, consistent load for your guitar’s pickups, ensuring your signal arrives at the first pedal intact and full of Tone. From Pedal Board to the amplifier, it not only buffers the signal, ensuring optimum impedance loading and performance, but also allows for increased signal levels for extra long cable runs via the built-in Line Driver (Footswitchable Boost) feature. As with the Stowaway, all buffer circuitry is 100% discrete Class-A. The HIGH-WIRE also incorporates a fixed +3dB BOOST on a top mounted mini-toggle. The Footswitch is Dual Function and allows both the variable BOOST when hit once and a MUTE when held for a second. The HIGH-WIRE is the ultimate all-in-one Pedal Board signal loss remedy and will remove your tightrope Tone walk once and for all.
-
Details
Mesa/Boogie Stowaway Compact Input Buffer
The Stowaway™ is our compact 100% discrete Class-A Input Buffer solution designed to remedy a whole array of Input challenges caused by a variety of issues. From impedance loading and mismatching, to changes in a pickup’s character and response as a result of varying effect pedals’ input impedance and interconnecting cables’ capacitance, the Stowaway provides the stable, consistent load your instrument needs to sound as intended. While the Stowaway’s footprint is small, allowing it to be mounted on the most crowded of pedal boards, its Feature Set is professional and comprehensive. If your signal does any significant traveling, bring along a Stowaway to guard your Tone.
-
Details
RADIAL BIGSHOT ABY TRUE BYPASS SWITCHER
- True-bypass ABY amp selector with tuner out
- On-board transformer to eliminate hum & buzz
- 180° polarity reverse to phase-match amps
- 100% passive, does not require a battery or power
-
Details
RADIAL J48 PHANTOM POWERED ACTIVE DIRECT BOX
- Ultra low distortion of all types
- Exceptional headroom & dynamic range
- Retains instrument’s natural sound
- Powered by 48V phantom
-
Details
RADIAL JDI PASSIVE DIRECT BOX
- Jensen Transformer equipped passive DI
- Eliminates hum and buzz from ground loops
- Virtually zero phase & harmonic distortion
- Exceptional signal handling and noise rejection
-
Details
RADIAL PROD2 STEREO DIRECT BOX
- Stereo direct box designed for keyboards
- Smooth, warm sound rounds out digital edge
- Able to handle huge transients without choking
- May be rack mounted for touring rigs
-
Details
RADIAL PRO D.I. PASSIVE DIRECT BOX
- Compact passive direct box for stage and studio
- Able to handle huge transients without distortion
- Transformer isolation eliminates noisy ground loops
- Plug and play easy to use feature set – on stage or in the studio
-
Details
ONE CONTROL CHAMAELEO TAIL LOOP II 5 LOOP PROGRAMABLE SWITCHER
The Chamaeleo Tail Loop Mark II is a five-channel programable loop switcher equipped with six DC outputs. The loops are all true bypass and it also has a separate tuner output. Perfect for pedals or tuners that seem to sucking out your tone while not in use. Three banks for a total of fifteen individual programs.
Takes a standard 9V power supply and can be used passively if so desired, however power outputs will not be active. -
Details
ONE CONTROL IGUANA TAIL II 5 LOOP SWITCHER
The Iguana is a five-channel loop switcher equipped with six DC outputs. The loops are all true bypass and it also has a separate tuner output. Perfect for pedals or tuners that seem to sucking out your tone while not in use. Takes a standard 9V power supply and can be used passively if so desired, however power outputs will not be active. -
Details
ONE CONTROL SALAMANDRA TAIL 3 LOOP PROGRAMABLE SWITCHER
This is an effect switcher with increased usability and operability. The One Control Salamandra Tail Loop was specially developed to control the effect with more flexibility.
-
Details
ONE CONTROL XENAGAMA TAIL II 3 LOOP SWITCHER
The Xenagama is a three-channel loop switcher equipped with four DC outputs. It’s perfect for smaller pedal boards that don’t have the room to accommodate a switcher and a power supply. The loops are all true bypass and it also has a separate tuner output. Perfect for pedals or tuners that seem to sucking out your tone while not in use. Takes a standard 9V power supply and can be used passively if so desired, however power outputs will not be active. This small loop switcher is perfect for the minimalist who needs a little more.
-
Details
ONE CONTROL BLACK LOOP 2 LOOP SWITCHER
The BLACK LOOP is a 2 Loop true bypass switcher with two DC outs.
While using the DC Input the two DC outs can be used. While pedals are connected to Loop 1 or Loop 2 they can be simultaneously powered and bypassed by using the Black Loop’s true by-pass capabilities.
Players can connect multiple pedals into each loop to create two independent effect chains. The Black Loop is a great solution for bypassing vintage effect while not in use. The Black Loop has several uses depending on how you connect it.
-
Details
PEDALTRAIN PT-CLP-SC CLASSIC PRO PEDAL BOARD W/SOFT CASE
Pedaltrain’s all-new Classic Series is rooted in the company’s best-selling pedal board models. Pedaltrain has incorporated design improvements that make these models better than ever. The Classic PRO should be familiar to you. Based on the original PT-PRO, the Classic PRO features Pedaltrain’s original five-rail “pro” design with traditional rail spacing. The Classic PRO continues Pedaltrain’s trend toward an open front design making power supply and switching system mounting flexible and convenient.
-
Details
PEDALTRAIN PT-CL2-SC CLASSIC 2 PEDAL BOARD
Pedaltrain’s all-new Classic Series is rooted in the company’s best-selling pedal board models. Pedaltrain has incorporated design improvements that make these models better than ever. The Classic 2 should be familiar to you. Based on the original PT-2, the Classic 2 features Pedaltrain’s original four-rail design and traditional rail spacing.
-
Details
PEDALTRAIN PT-CLJ-SC CLASSIC JR. PEDALBOARD W/TOUR CASE
Pedaltrain’s all-new Classic Series is rooted in the company’s best-selling pedal board models. Pedaltrain has incorporated design improvements that make these models better than ever. The Classic JR model should be familiar to you. Based on the original PT-JR, the Classic JR features Pedaltrain’s original four-rail design and traditional rail spacing.
-
Details
PEDALTRAIN PT-CLJ-SC CLASSIC JR. PEDALBOARD W/SOFT CASE
Pedaltrain’s all-new Classic Series is rooted in the company’s best-selling pedal board models. Pedaltrain has incorporated design improvements that make these models better than ever. The Classic JR model should be familiar to you. Based on the original PT-JR, the Classic JR features Pedaltrain’s original four-rail design and traditional rail spacing.
-
Details
PEDALTRAIN PT-M24-HC METRO 24 PEDAL BOARD W/HARD CASE
The Metro Series is Pedaltrain’s first three-rail pedal board system. Pedaltrain’s new Metro Series is perfect for players who need a portable, grab-and-go solution. Musicians who live or work in urban settings or tight spaces will appreciate Metro’s low profile, horizontal orientation. Thanks to Pedaltrain’s new modified rail system, even the smallest pedals make an incredibly strong bond with the pedal board.
-
Details
PEDALTRAIN PT-M24-SC METRO 24 PEDAL BOARD
The Metro Series is Pedaltrain’s first three-rail pedal board system. Pedaltrain’s new Metro Series is perfect for players who need a portable, grab-and-go solution. Musicians who live or work in urban settings or tight spaces will appreciate Metro’s low profile, horizontal orientation. Thanks to Pedaltrain’s new modified rail system, even the smallest pedals make an incredibly strong bond with the pedal board.
-
Details
PT-M20-HC PEDALTRAIN METRO 20 PEDAL BOARD W/ SOFT CASE
The Metro Series is Pedaltrain’s first three-rail pedal board system. Pedaltrain’s new Metro Series is perfect for players who need a portable, grab-and- go solution. Musicians who live or work in urban settings or tight spaces will appreciate Metro’s low profile, horizontal orientation. Thanks to Pedaltrain’s new modified rail system, even the smallest pedals make an incredibly strong bond with the pedal board.
-
Details
PT-M20-SC PEDALTRAIN METRO 20 PEDAL BOARD W/ SOFT CASE
The Metro Series is Pedaltrain’s first three-rail pedal board system. Pedaltrain’s new Metro Series is perfect for players who need a portable, grab-and- go solution. Musicians who live or work in urban settings or tight spaces will appreciate Metro’s low profile, horizontal orientation. Thanks to Pedaltrain’s new modified rail system, even the smallest pedals make an incredibly strong bond with the pedal board.
-
Details
TRUETONE 1 SPOT PRO CS7 POWER SUPPLY
“It took 3 years and lots of experimentation, but we were finally able to design a 1 SPOT Pro, using our own proprietary technology to give musicians all the features they need for today’s pedalboards. The original 1 SPOT still works great for most musicians, but for those who need more power and versatility, the 1 SPOT Pro fills the need perfectly.”
-
Details
TRUETONE ONESPOT POWER SUPPLY
The 1 SPOT is the original 9V pedalboard power supply that only takes up one spot on an outlet strip or wall outlet. It solves an annoying problem that people have complained about for years, and does so with quiet, reliable performance!
